All Products

Simply apply a generous amount of Aussie Total Miracle Conditioner to your clean, wet hair and work the conditioner in and then detangle using your fingers or a wide-tooth comb. As Aussie Total Miracle Conditioner works its magic, close your eyes, breathe, and take in the luxuriant scents of citrus, florals, and musk wafting around you and freshening your hair with a gorgeous scent that sticks around all day long. Rinse thoroughly, and enjoy the renewed strength and softness of your rejuvenated hair.

Water, Cetyl Alcohol, Stearamidopropyl Dimethylamine, Glycerin, Stearyl Alcohol, Glutamic Acid, Bis-Aminopropyl Dimethicone, Sodium Chloride, Prunus Armeniaca (Apricot) Kernel Oil, Fragrance, Benzyl Alcohol, Disodium EDTA, Phenoxyethanol, Citric Acid, Methylchloroisothiazolinone, Methylisothiazolinone

Simply apply a generous amount of Aussie Total Miracle Shampoo to your hair and work it in from root to tip with your fingers. As Total Miracle Shampoo works its magic and gently cleanses each individual strand of your hair, close your eyes, and take in the luxuriant scents of citrus, florals, and musk that will freshen your hair all day long. All that's left to do is pair it with Aussie's Total Miracle Conditioner for even more moisture plus detangling. AUSSome hair days, here you come!

Water, Sodium Lauryl Sulfate, Cocamidopropyl Betaine, Glycol Distearate, Sodium Chloride, Prunus Armeniaca (Apricot) Kernel Oil, Sodium Citrate, Sodium Xylenesulfonate, Fragrance, Dimethiconol, Sodium Benzoate, Guar Hydroxypropyltrimonium Chloride, Dimethicone, Citric Acid, Tetrasodium EDTA, TEA-Dodecylbenzenesulfonate, Trideceth-10, Methylchloroisothiazolinone, Benzyl Alcohol, Methylisothiazolinone, Yellow 5, Red 33

1. Prep lashes by gently removing from tray.
2. GLUE at the base of your natural lashes. Avoid getting the GLUE all the way to the lash tips. Do one section at a time.
3. Apply lash under the base of your natural lashes away from your waterline.
4. Apply a thin coat of SEAL under lashes. This eliminates any sticky residue and holds lashes in place.

To Remove: Use Any Oil Based Remover on lashes. Wait 10-15 seconds and slide off lashes with fingers.

Precautions: Use only as directed. KEEP OUT OF REACH OF CHILDREN. FOR EXTERNAL USE ONLY.

Cetyl Ethylhexanoate, Cocos Nucifera (Coconut) Oil, PEG-20 Glyceryl Triisostearate, Polyethylene, Calendula Officinalis Flower Extract, Chamomilla Recutita (Matricaria) Flower Extract, Carthamus Tinctorius (Safflower) Seed Oil, Fragrance(Parfum), Benzyl Salicylate, Citronellol, Linalool.

EASY APPLICATION:

PREP: PLEASE READ THOROUGHLY BEFORE STARTING APPLICATION. DO NOT GET ANY BOND, SEAL, or REMOVER in your EYES.

1. Start with clean lashes. Do not apply mascara before applying Seamless.
2. For best results, curl lashes before application.
3. Apply a light coat of BOND at base. Avoid getting BOND all the way to the lash tips. Do one section at a time.
4. Apply under the base of your natural lashes away from waterline.
5. Use APPLICATOR to seal lashes.
6. Apply a thin coat of SEAL under. This eliminates any sticky residue and holds lashes in place.

DAILY MAINTENANCE:

Do not get lashes wet for 24 hours.

TO REMOVE:

Brush REMOVER on lashes. Wait 10-15 seconds and slide off lashes with fingers.

Precautions: BE CAREFUL NOT to get REMOVER in eyes! Use only as directed. KEEP OUT OF REACH OF CHILDREN. FOR EXTERNAL USE ONLY. Flammable. Keep away from heat.

Bond: Acrylates/Ethylhexyl Acrylate Copolymer, Water (Eau,Aqua), Butylene Glycol, Alcohol Denat., AMP-Acrylates Copolymer, Phenoxyethanol, Citric Acid, Sorbitol, Sodium Carbonate, Ceteareth-25, Cellulose Gum, Ethylhexylglycerin, Black 2; Seal: Cyclopentasiloxane, Cyclohexasiloxane Trimethylsiloxysilicate, Water (Eau,Aqua), VP/Eicosene Copolymer, Polypropylsilsesquioxane, Glycerin, Hydrogenated Polyisobutene, Hydroxypropylcellulose, Polysorbate 20, Phenoxyethanol, Ethylhexylglycerin, Tocopheryl Acetate; Remover: Butyrolactone, Hydroxypropylcellulose, Glycerin.

Thoroughly clean your eyelashes and eyelids so they are make-up and oil free.

1. Check Fit: Lay lash on top of your natural lash. If it extends beyond your lash line, trim the excess with small scissors.
2. Apply Adhesive: Squeeze a thin line of Adhesive along the lash band. A toothpick can be used to spread it evenly. Wait about 30 seconds for adhesive to set.
3. Apply Lash: Place the lash as close to your natural lash line as possible. Use your fingertip to gently press along the band to secure in place.

Hlooooooooooooooooooooooooooooooooo

Check fit: Align band with natural lash line to check fit.

Apply Adhesive: Apply a thin line of adhesive along band. Wait thirty seconds to set.

Apply Lashes: Secure lash band by pressing onto lash line.

Precautions: Keep away from children. Use only as directed. Avoid getting into eyes. If contact occurs, wash immediately with lukewarm water.

Hlooooooooooooooooooooooooooooooooo

1. Prep lashes by gently removing from tray.
2. GLUE at the base of your natural lashes. Avoid getting the GLUE all the way to the lash tips. Do one section at a time.
3. Apply lash under the base of your natural lashes away from your waterline.
4. Apply a thin coat of SEAL under lashes. This eliminates any sticky residue and holds lashes in place.

To Remove: Use Any Oil Based Remover on lashes. Wait 10-15 seconds and slide off lashes with fingers.

Precautions: Use only as directed.

Cetyl Ethylhexanoate, Cocos Nucifera (Coconut) Oil, PEG-20 Glyceryl Triisostearate, Polyethylene, Calendula Officinalis Flower Extract, Chamomilla Recutita (Matricaria) Flower Extract, Carthamus Tinctorius (Safflower) Seed Oil, Fragrance(Parfum), Benzyl Salicylate, Citronellol, Linalool.

Hlooooooooooooooooooooooooooooooooo

Hlooooooooooooooooooooooooooooooooo

This product is meant to be mixed with other colors to create custom shades.

Aqua, Cetyl Alcohol, Glycerine, Glycerol Stearate, PEG-100 Stearate, Propylene Glycol, Stearalkonium Chloride, Guar Hydroxypropyltrimonium Chloride, Quaternium-52, Cetearyl Alcohol, Ceteareth-20, Hydrolyzed Soy Protein, Fragrance, Citric Acid, Tetrasodium EDTA, Methylchloroisothiazolinone, Methylisothiazolinone. May Also Contain: Basic Blue 3, Basic Blue 7, Basic Orange 1, Basic Orange 31, Basic Red 22, Basic Red 51, Basic Yellow 29, Basic Yellow 87, Basic Violet 2, Basic Violet 13, Ext. Violet 2.

Instructions are included in every Bleach, Please kit and should be followed closely. For the best results:

• The hair should be at least slightly dirty (one day or longer since last wash), dry, and detangled.
• Mix together bleach and developer until it is a creamy, even consistency with no lumps. DO NOT use a metal bowl or metal tools.
• Then, using a hair applicator, brush the bleach mixture onto the hair in small sections for even coverage. Avoid contact on the scalp when applying the bleach. Do not brush hair close to the scalp right before applying bleach, as it can open up microscopic cuts in the scalp and increase sensitivity and burning during the bleaching process. To avoid hot roots, apply bleach to the mids and ends of the hair first, and leave roots for the last step, as they will lift quicker.
• After all your sections are fully saturated, go back and apply the bleach to roots and any missed spots. Any leftover bleach mixture must be discarded.
• Wait 15-45 minutes, checking your hair every 5 minutes while processing.
• Rinse out thoroughly in lukewarm water once you've received your desired level of lift, or after 45 minutes to ensure the safety of your hair.
• Once you've rinsed all the bleach out with lukewarm water you can then apply shampoo and wash it once more. After which a deep conditioner is highly recommended to keep hair from drying out further which may lead to unnecessary breakage.
• If you're just bleaching your roots, be careful to not apply bleach over previously bleached hair to avoid damage.

Precautions: Read all directions and warnings before application.

• Do not use if you have a sensitive, itchy or damaged scalp.
• Avoid contact with skin and eyes.
• Do not get mixture in eyes; to do so may cause blindness. If mixture gets into eyes rinse immediately with lukewarm water and seek medical attention immediately.
• If you need to wear contact lenses during application and mixture gets into eyes, remove lenses first, then flush immediately with lukewarm water. If irritation persists, get medical attention.
• Wear disposable gloves when applying.
• Do not cover or apply heat while the product is in your hair.
• Thoroughly rinse hair application.
• Do not ingest.
• Keep out of reach of children. Do not apply on children.
• Wash hands thoroughly after use.
• Do not use on facial hair or eyebrow hair.
• Do not use on hair that has been previously treated with bleach, highlights, or ombre.
• Do not use on hair that has been processed with straightener or relaxer.
• Do not use on brittle, damaged hair.
• Do not use over metallic dyes, color restorers, compound hennas or hennas.
• Discard any unused mixture of bleach and developer. Do not store prepared mixture, as the container may burst.
• Do not shampoo hair for two days prior to lightening as this can lead to scalp sensitivity.
• Wait at least two weeks before using this product on a new perm.
• Do not apply any bleach more than once in 48 hours. Allow at least 3 weeks to elapse between lightening applicators to avoid sensitivity and breakage.
• Use only plastic or glass utensils, clips or combs; never metal.
• Do not mix the components of this kit with any other product.
• Store and use at room temperature (50 to 80 degrees F)

Developer: Water, Hydrogen Peroxide, Ethylhexyl Pelargonate, Cetearyl Alcohol, Polyoxyethlene, Hydrogenated Castor Oil, Stearyl Alcohol, Polysorbate 80, Mangifera Indica (Mango) Seed Butter, Theobroma Cacao (Cocoa) Seed Butter, Euterpe Oleracea (Acai) Fruit Extract, Helianthus Annus (Sunflower) Seed Oil, Carica Papaya (Papaya) Fruit Extract, PEG-200 Castor Oil, Disodium EDTA.

Cream Bleach: Mineral Oil, Potassium Persulfate, Ammonium Persulfate, Sodium Metasilicate, Sodium Persulfate, Sodium Silicate, Polybutene, Aluminum Distearate, Sodium Stearate, Hydrated Silica, Hydroxyethyl Cellulose, Silica, Disodium EDTA, Arginine, Polycare Split Therapy (Hydroxypropyl Guar Hydroxypropyltrimonium Choride), Sorbitol, Ultramarines (CI 77007), D&G Violet #2 (CI 60725).

Benefits

• Cruelty-Free
• Semi-Permanent
• Hydrating
• Zero Damage
• No Harsh Chemicals (Peroxide, Ammonia, or PPD)
• Vegan

Features

• Arctic Fox Aquamarine is a vibrant turquoise shade that is highly pigmented.
• It'll turn out most vividly on pre-lightened hair, but can still work to give a deep teal tint to darker shades of unbleached hair.
• Always do a patch and strand test before coloring.

Because everyone's hair is different, do the strand test and see the result of the color before full application. A patch test is also recommended to confirm you're not allergic.

Step 1: Shampoo and dry hair thoroughly. Do NOT use conditioner.

Step 2: Use coconut oil (or petroleum jelly) around hairline and on ears to prevent staining of the skin (optional).

Step 3: Remove bottle cap and inner seal.

Step 4: Wear protective gloves for application and pour desired amount into bowl.

Step 5: Apply color evenly with color brush. Begin at the root of the hair and work it evenly through to the ends. Start nape of the neck and work upwards through the head and be sure to completely saturate the hair shaft.

Step 6: Place a plastic cap over the hair and leave color on for at least 1/2 hour or more. Arctic Fox hair color will NOT damage your hair and has added conditioner, so leaving it on for longer will not hurt a thing.

Step 7: Rinse hair in tepid water thoroughly, until the water runs clear. For the first rinse, do not rinse hair while showering! Best bet is to rinse in the kitchen sink with cold water.

To prevent color bleeding make sure hair is completely dry before sleeping.

See individual packaging.

Precautions: For external use only, when using this product do not get into eyes or use on a deep or puncture wound.

Petrolatum (41%), Mineral Oil, Ceresin, Lanolin Alcohol, Panthenol, Glycerin, Bisabolol.